Large Tele Style Guitar Switch Tip with Cross Hole Dual Slot, 3/5 Way Pickup Selector

The Large Tele Style Switch Tip is a practical replacement component for electric guitar owners. The key feature is its cross-shaped internal hole with two different slot sizes—the larger slot fits USA-made and premium switches with 3/16" (4.8mm) blades, while the smaller slot fits import and entry-level switches with 9/64" (3.7mm) blades. Tested with both sizes: for a 3.7mm import switch, one slot presses on tight and the other is too loose and falls off; for a 4.8mm USA switch, one slot fits perfectly and the other is too tight to slide in. Rotate 90 degrees to find the matching slot. The precision-machined cross hole delivers a tight, secure fit—no wobble, no loosening, and no lost switch tips during gigs or practice. Made of durable opaque plastic with clean molding and no flash or mold lines. Classic large Tele-style barrel shape matches the original equipment look. Simple push-on, tool-free installation. Available in 2-pack or 4-pack, with 6 classic colors: Black, Cream, Green, Blue, White, and Red.

Key Features

Cross Hole Dual Slot Universal Fit: Larger slot fits USA/premium 3/16" (4.8mm) blades; smaller slot fits import/entry-level 9/64" (3.7mm) blades. Tested with both sizes: 3.7mm switch—one slot tight, one slot falls off; 4.8mm switch—one slot fits, one slot won't slide in. Rotate 90 degrees to find the matching slot. Universal compatibility with most Strat, Tele, and other electric guitar pickup selectors.

Cross Hole Dual Slot Universal Fit:

Larger slot fits USA/premium 3/16" (4.8mm) blades; smaller slot fits import/entry-level 9/64" (3.7mm) blades. Tested with both sizes: 3.7mm switch—one slot tight, one slot falls off; 4.8mm switch—one slot fits, one slot won't slide in. Rotate 90 degrees to find the matching slot. Universal compatibility with most Strat, Tele, and other electric guitar pickup selectors.

Snug Secure Fit Won't Fall Off: Precision cross hole delivers tight, stable fit—no wobble, no loosening, no lost tips. Solves the common problem of loose switch tips that require electrical tape. Firm pressure recommended to fully seat.

Snug Secure Fit Won't Fall Off:

Precision cross hole delivers tight, stable fit—no wobble, no loosening, no lost tips. Solves the common problem of loose switch tips that require electrical tape. Firm pressure recommended to fully seat.

Large Tele Style Barrel Shape: Classic large Tele-style barrel shape matches original equipment look. Fits perfectly on Stratocaster, Telecaster, and other electric guitars. Larger size provides comfortable, easy-to-grip surface for smoother switching.

Large Tele Style Barrel Shape:

Classic large Tele-style barrel shape matches original equipment look. Fits perfectly on Stratocaster, Telecaster, and other electric guitars. Larger size provides comfortable, easy-to-grip surface for smoother switching.

Durable Opaque Plastic: High-quality durable opaque plastic—no wispy, milky clouds, or thin spots. Clean molding with no flash or mold lines. Withstands daily practice and regular performance use without cracking, fading, or wear.

Durable Opaque Plastic:

High-quality durable opaque plastic—no wispy, milky clouds, or thin spots. Clean molding with no flash or mold lines. Withstands daily practice and regular performance use without cracking, fading, or wear.

Push-On Tool-Free Installation: Simple push-on design—no soldering, drilling, or professional tools. Pull old tip straight off, press new tip onto blade until fully seated. If it doesn't slide in easily, rotate 90 degrees to align the other slot.

Push-On Tool-Free Installation:

Simple push-on design—no soldering, drilling, or professional tools. Pull old tip straight off, press new tip onto blade until fully seated. If it doesn't slide in easily, rotate 90 degrees to align the other slot.

2-Pack & 4-Pack, 6 Colors: 2-pack for direct replacement, 4-pack for extra spares or multiple guitars. 6 classic colors: Black, Cream, Green, Blue, White, Red. Switch tips easily get lost—backups save mid-gig emergencies.

2-Pack & 4-Pack, 6 Colors:

2-pack for direct replacement, 4-pack for extra spares or multiple guitars. 6 classic colors: Black, Cream, Green, Blue, White, Red. Switch tips easily get lost—backups save mid-gig emergencies.

Technical Specifications

Style: Large Tele-style barrel shape

Style:

Large Tele-style barrel shape

Overall Dimensions: 15.2mm (Height) x 12.3mm (Outer Diameter)

Overall Dimensions:

15.2mm (Height) x 12.3mm (Outer Diameter)

Internal Hole: Cross-shaped with dual slots

Internal Hole:

Cross-shaped with dual slots

Larger Slot: Fits USA/premium 3/16" (4.8mm) switch blades

Larger Slot:

Fits USA/premium 3/16" (4.8mm) switch blades

Smaller Slot: Fits import/entry-level 9/64" (3.7mm) switch blades

Smaller Slot:

Fits import/entry-level 9/64" (3.7mm) switch blades

Material: Durable opaque plastic

Material:

Durable opaque plastic

Installation: Push-on, tool-free

Installation:

Push-on, tool-free

Compatible Switches: Standard 3-way and 5-way pickup selector switches

Compatible Switches:

Standard 3-way and 5-way pickup selector switches

Compatible Guitars: Most Strat, Tele, and other electric guitars with blade-style pickup selectors

Compatible Guitars:

Most Strat, Tele, and other electric guitars with blade-style pickup selectors

Not Compatible: Screw-type toggle switches (Gibson/Epiphone LP style)

Not Compatible:

Screw-type toggle switches (Gibson/Epiphone LP style)

Available Colors: Black, Cream, Green, Blue, White, Red

Available Colors:

Black, Cream, Green, Blue, White, Red

Available Packs: 2 Pcs, 4 Pcs

Available Packs:

2 Pcs, 4 Pcs

Package Includes: 2 or 4 x Guitar Switch Tips

Package Includes:

2 or 4 x Guitar Switch Tips

Important Notes

Dual Slot Fitment Note (Most Important): This switch tip has a cross-shaped hole with two different slot sizes. The larger slot fits USA-made and premium switches with 3/16" (4.8mm) blades. The smaller slot fits import and entry-level switches with 9/64" (3.7mm) blades. Tested with both sizes: for a 3.7mm import switch, one slot presses on tight and the other is too loose and falls off; for a 4.8mm USA switch, one slot fits perfectly and the other is too tight to slide in. If the tip doesn't slide in easily, rotate it 90 degrees and try the other slot—one of the two slots will fit your switch. Firm, even pressure is required to fully seat the tip. Do not use excessive force or tools that could damage the switch.

Dual Slot Fitment Note (Most Important):

This switch tip has a cross-shaped hole with two different slot sizes. The larger slot fits USA-made and premium switches with 3/16" (4.8mm) blades. The smaller slot fits import and entry-level switches with 9/64" (3.7mm) blades. Tested with both sizes: for a 3.7mm import switch, one slot presses on tight and the other is too loose and falls off; for a 4.8mm USA switch, one slot fits perfectly and the other is too tight to slide in.

If the tip doesn't slide in easily, rotate it 90 degrees and try the other slot—one of the two slots will fit your switch.

Firm, even pressure is required to fully seat the tip. Do not use excessive force or tools that could damage the switch.

Blade Style Only: These switch tips are designed for blade-style pickup selector switches (common on Strat, Tele, and similar guitars). They are NOT compatible with screw-type toggle switches found on Gibson, Epiphone Les Paul, and similar guitars. Please verify your switch type before ordering.

Blade Style Only:

These switch tips are designed for blade-style pickup selector switches (common on Strat, Tele, and similar guitars). They are NOT compatible with screw-type toggle switches found on Gibson, Epiphone Les Paul, and similar guitars. Please verify your switch type before ordering.

Material Note: Made of durable opaque plastic. The material is intentionally opaque with no wispy, milky clouds, or thin spots. Clean molding ensures no flash or mold lines. This is the same construction used by many factory-style switch tips. Minor surface marks may be visible at close range, which is normal for injection-molded plastic parts.

Material Note:

Made of durable opaque plastic. The material is intentionally opaque with no wispy, milky clouds, or thin spots. Clean molding ensures no flash or mold lines. This is the same construction used by many factory-style switch tips. Minor surface marks may be visible at close range, which is normal for injection-molded plastic parts.

Installation Tip: To remove an old switch tip, pull it straight off the switch blade. Do not twist or pry sideways, as this could damage the switch or the tip. A small cloth can be used for extra grip if the tip is tight. To install, align the cross hole with the blade and press firmly until fully seated. If it doesn't slide in, rotate 90 degrees and try the other slot.

Installation Tip:

To remove an old switch tip, pull it straight off the switch blade. Do not twist or pry sideways, as this could damage the switch or the tip. A small cloth can be used for extra grip if the tip is tight. To install, align the cross hole with the blade and press firmly until fully seated. If it doesn't slide in, rotate 90 degrees and try the other slot.

Color Variation: Actual product color may differ slightly from the listing images due to variations in photographic lighting, monitor settings, and screen display. Red is a soft, muted red—not a bright UK telephone box or lipstick red.

Color Variation:

Actual product color may differ slightly from the listing images due to variations in photographic lighting, monitor settings, and screen display. Red is a soft, muted red—not a bright UK telephone box or lipstick red.

FAQ

Q: It won't slide onto my switch—what do I do?A: Rotate the tip 90 degrees and try again. The cross hole has two different slot sizes—one for USA/premium switches (3/16"/4.8mm) and one for import/entry-level switches (9/64"/3.7mm). If one slot doesn't fit, the other slot will. Firm pressure is needed to fully seat the tip.

Q: It won't slide onto my switch—what do I do?

A: Rotate the tip 90 degrees and try again. The cross hole has two different slot sizes—one for USA/premium switches (3/16"/4.8mm) and one for import/entry-level switches (9/64"/3.7mm). If one slot doesn't fit, the other slot will. Firm pressure is needed to fully seat the tip.

Q: Will this switch tip fit my USA-made Fender Stratocaster or Telecaster?A: Yes. The larger slot in the cross hole is designed for USA-made and premium switches with 3/16" (4.8mm) blades. If the tip does not slide on easily, rotate it 90 degrees to align the larger slot with your blade. Firm pressure is required to fully seat the tip.

Q: Will this switch tip fit my USA-made Fender Stratocaster or Telecaster?

A: Yes. The larger slot in the cross hole is designed for USA-made and premium switches with 3/16" (4.8mm) blades. If the tip does not slide on easily, rotate it 90 degrees to align the larger slot with your blade. Firm pressure is required to fully seat the tip.

Q: Will this fit my Squier or import guitar?A: Yes. The smaller slot in the cross hole fits import and entry-level switches with 9/64" (3.7mm) blades, including most Squier Affinity/Standard models and other Asian-made guitars. Rotate the tip 90 degrees if needed to align the smaller slot.

Q: Will this fit my Squier or import guitar?

A: Yes. The smaller slot in the cross hole fits import and entry-level switches with 9/64" (3.7mm) blades, including most Squier Affinity/Standard models and other Asian-made guitars. Rotate the tip 90 degrees if needed to align the smaller slot.

Q: What is the dual slot design?A: The cross-shaped internal hole has two different slot sizes—one larger (3/16" / 4.8mm) for USA/premium switches, and one smaller (9/64" / 3.7mm) for import/entry-level switches. Tested with both sizes: for a 3.7mm switch, one slot fits tight and the other falls off; for a 4.8mm switch, one slot fits perfectly and the other won't slide in. This universal design means one tip fits both types of switches—just rotate 90 degrees to find the matching slot for your guitar.

Q: What is the dual slot design?

A: The cross-shaped internal hole has two different slot sizes—one larger (3/16" / 4.8mm) for USA/premium switches, and one smaller (9/64" / 3.7mm) for import/entry-level switches. Tested with both sizes: for a 3.7mm switch, one slot fits tight and the other falls off; for a 4.8mm switch, one slot fits perfectly and the other won't slide in. This universal design means one tip fits both types of switches—just rotate 90 degrees to find the matching slot for your guitar.

Q: Will this fit my Gibson or Epiphone Les Paul?A: No. These switch tips are designed for blade-style pickup selector switches (common on Strat, Tele, and similar guitars). They are NOT compatible with screw-type toggle switches found on Gibson, Epiphone Les Paul, and similar guitars.

Q: Will this fit my Gibson or Epiphone Les Paul?

A: No. These switch tips are designed for blade-style pickup selector switches (common on Strat, Tele, and similar guitars). They are NOT compatible with screw-type toggle switches found on Gibson, Epiphone Les Paul, and similar guitars.

Q: How tight is the fit? Will it fall off?A: The precision-machined cross hole delivers a tight, secure fit—no wobble, no loosening, and no lost switch tips. This solves the common problem of loose switch tips that require electrical tape to stay in place. Firm pressure is recommended to fully seat the tip for maximum stability.

Q: How tight is the fit? Will it fall off?

A: The precision-machined cross hole delivers a tight, secure fit—no wobble, no loosening, and no lost switch tips. This solves the common problem of loose switch tips that require electrical tape to stay in place. Firm pressure is recommended to fully seat the tip for maximum stability.

Q: What material is this made of?A: Made of high-quality, durable opaque plastic with no wispy, milky clouds, or thin spots. Clean molding with no flash or mold lines ensures a professional, factory-style appearance. This is the same construction used by many factory-style switch tips.

Q: What material is this made of?

A: Made of high-quality, durable opaque plastic with no wispy, milky clouds, or thin spots. Clean molding with no flash or mold lines ensures a professional, factory-style appearance. This is the same construction used by many factory-style switch tips.

Q: Do I need tools to install this?A: No tools required. Installation is simple push-on: pull the old tip straight off, align the cross hole with the switch blade, and press firmly until fully seated. If it doesn't slide in easily, rotate 90 degrees and try the other slot. No soldering, drilling, or professional tools needed.

Q: Do I need tools to install this?

A: No tools required. Installation is simple push-on: pull the old tip straight off, align the cross hole with the switch blade, and press firmly until fully seated. If it doesn't slide in easily, rotate 90 degrees and try the other slot. No soldering, drilling, or professional tools needed.

Product Description

Large Tele Style Guitar Switch Tip with Cross Hole Dual Slot, 3/5 Way Pickup Selector

Key Features

Technical Specifications

Important Notes

FAQ